Royal R8 Quick-Change Tooling System
- The Royal Quick-Change Tool System provides a fast method for changing tools on a Bridgeport-style mill – once the R8 body is installed in the machine spindle, tools can be changed in seconds.
- One hand operation – simply depress the brass locking button and rotate collar to the locked-open position. When a new tool is inserted, it depresses a spring-loaded pin, snapping the collar back into the locked-closed position.
- Very accurate – total system runout can be less than 0.0005″ TIR under the right circumstances.
- Short overhang (1 1⁄8″) and two positive-drive keys enable many common milling and drilling operations to be easily performed.
Please note that this tool is designed for light/medium-duty applications where the ability to change tools quickly outweighs the need for extreme rigidity. We do not recommend using this system for heavy milling or high-production applications.
![R8_Quick_Change_intro1](https://royalproducts.com/wp-content/uploads/2021/02/R8_Quick_Change_intro1.jpg)
![R8_Quick_Change_step1](https://royalproducts.com/wp-content/uploads/2021/02/R8_Quick_Change_step1.jpg)
- Loading the Quick-Change Body into a standard R8 spindle.
![R8_Quick_Change_step2](https://royalproducts.com/wp-content/uploads/2021/02/R8_Quick_Change_step2.jpg)
- Loading drill chuck holder and drill into body.
![R8_Quick_Change_step3](https://royalproducts.com/wp-content/uploads/2021/02/R8_Quick_Change_step3.jpg)
- Removing drill chuck holder with one hand.
![R8_Quick_Change_step4](https://royalproducts.com/wp-content/uploads/2021/02/R8_Quick_Change_step4.jpg)
- Inserting endmill holder and endmill for next operation.
![R8 Quick-Change Body Only](https://royalproducts.com/wp-content/uploads/2020/08/SQUARE_R8EasyChangeUpright.jpg)
R8 Quick-Change Body Only
- Only protrudes 1 1⁄8″ from gage line.
![R8_QC_Milling_Kit](https://royalproducts.com/wp-content/uploads/2021/02/R8_QC_Milling_Kit.jpg)
Start-Up Milling Kit
Consisting of:
- Quick-Change Body
- One 3⁄8″ Endmill Tool Holder
- One 1⁄2″ Endmill Tool Holder
- One 5⁄8″ Endmill Tool Holder
- One Stand FREE
![R8_QC_Drill_Mill_Kit](https://royalproducts.com/wp-content/uploads/2021/02/R8_QC_Drill_Mill_Kit.jpg)
Start-Up Drill & Mill Kit
Consisting of:
- Quick-Change Body
- Three Drill Chuck Tool Holders (specify tapers)
- One 3⁄8″ Endmill Tool Holder
- One 1⁄2″ Endmill Tool Holder
- One 5⁄8″ Endmill Tool Holder
- One Stand FREE
![R8_QC_Endmill](https://royalproducts.com/wp-content/uploads/2021/02/R8_QC_Endmill.jpg)
Endmill Tool Holder*
Filters Sort results
Reset Apply
* Single endmills only. Designed for minimum overhang.
5/8″, 3/4″ and 1″ for light milling only. For heavy milling use solid endmill holder.
![R8_QC_Collet_Chuck_Holder](https://royalproducts.com/wp-content/uploads/2021/02/R8_QC_Collet_Chuck_Holder.jpg)
Collet Chuck Tool Holder
Filters Sort results
Reset Apply
![R8_QC_Drill_Chuck_Holder](https://royalproducts.com/wp-content/uploads/2021/02/R8_QC_Drill_Chuck_Holder.jpg)
![R8_QC_Shell_Mill_300](https://royalproducts.com/wp-content/uploads/2021/03/R8_QC_Shell_Mill_300.jpg)
![Tool Holder Stand](https://royalproducts.com/wp-content/uploads/2020/08/SQUARE_R8ToolHolderStand.jpg)