Royal QG Combo Power-Block™ Key-Operated Collet Fixtures — QG-80
$6,425.00
In Stock for Same Day Shipping
- These multi-function fixtures enable you to use Royal QG collets, Royal I.D. mandrels/sleeves, and 5C collets in your 3, 4, and 5-axis applications.
- Manually actuated with a hex key (included).
- Many of the same great features as our QG Combo CNC Collet Chucks, including ten-second collet changes and parallel-grip collets with a full 0.062" clamping range.
- Can be used in both stationary and rotary table applications. Caution – not for use on lathes or grinders above 5 rpm!
- Pullback design with an internally threaded backplate enables the use of a stop rod.
- Unit is supplied configured to accept Royal QG collets. For I.D. and 5C workholding, additional components are required (order separately).
| Fits Collet Chuck Model | QG-80 |
|---|---|
| Fixture Model | Key-Operated Combo |
| (A) Overall Height (in) | 4.25" |
| (B) Base Width x Length (in) | 6.5" |
| (C) Center to Center Mounting Holes (in) | 4.6" |
| (D) Nose Diameter (in) | 5.51" |
| (E) Mounting Hole Size (in) | 0.51" |
| Maximum Tightening Torque (ft-lbs) | 57 ft-lbs |
| Maximum Clamping Force (lbs) | 7420 lbs |
Three Great Workholding Options in One Fixture!
additional accessories
EXPANDING ROD ADAPTER
COMBO POWER BLOCK ADAPTER
5C COLLET NOSE
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov