Royal Bull Head Live Centers
- Designed for turning pipes, tubes, and parts with extra-large center holes.
- Two matched angular contact bearings provide good thrust and radial load ratings.
- Head diameter is 1⁄8″ over nominal size, enabling these centers to cover a wider range of workpieces.
- Bull Head design is shorter than a pipe head, reducing potential interference in blind center hole applications and ensuring that the load is positioned over the bearings for optimum strength.
![Proudly Made In USA Proudly Made In USA](https://royalproducts.com/wp-content/uploads/2020/10/ProudlyMadeInUSA@4x.png)
![Bull Head LC product large](https://royalproducts.com/wp-content/uploads/2021/03/Bull-Head-LC-product-large.jpg)
![Bull and Pipe LC feature diagram](https://royalproducts.com/wp-content/uploads/2021/03/Bull-and-Pipe-LC-feature-diagram-1.jpg)
![Live_Bull_Pipe_Head_schematic1](https://royalproducts.com/wp-content/uploads/2021/02/Live_Bull_Pipe_Head_schematic1.jpg)
Royal Standard Bull Head Live Centers
Filters Sort results
Reset Apply
Taper | B | E | G | MAX. SUGGESTED RPM | WEIGHT OF WORKPIECE (lbs.) | THRUST LOAD (lbs.) | PART NUMBER | PRICE | |
---|---|---|---|---|---|---|---|---|---|
3 MT | 3.15 | 2.520 | 1.00 | 5,000 | 615 | 1,780 | $1,295.00 | ||
4 MT | 4.15 | 3.010 | 1.25 | 4,500 | 860 | 2,550 | $1,615.00 | ||
5 MT | 4.15 | 3.010 | 1.25 | 4,500 | 860 | 2,550 | $1,615.00 | ||
5 MT | 5.15 | 3.170 | 2.00 | 4,000 | 1,145 | 3,450 | $1,995.00 | ||
5 MT | 6.15 | 3.600 | 2.50 | 3,500 | 1,450 | 4,500 | $2,775.00 |
* Maximum recommended operating limit. Operating above this speed could result in heat build-up and accelerated bearing wear.