Royal Quick-Grip™ Accu-Length™ CNC Collet Chucks Demo
Bolt & Go™
Our exclusive Bolt & Go™ mounting feature is standard on all Royal Quick-Grip™ Collet Chuck models. Bolt & Go™ enables chucks to be mounted very quickly and ensures maximum accuracy and rigidity. Click here for additional information.
Completely Sealed
Lubricated for life, these chucks incorporate multiple O-ring seals to keep contaminants out and prevent chip pack-up on bore-thru applications.
High RPM
All Royal Quick-Grip™ Collet Chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are less affected by centrifugal force.
Coolant Slinger
All bodies incorporate an oversized flange to protect the machine tool spindle bearings from coolant penetration.
Shortest Length
Royal Quick-Grip™ CNC Collet Chucks are among the shortest chucks available, providing maximum work envelope utilization. This is especially important for smaller machines with limited z-axis travel.
Note – Collets and installation tool sold separately.
Extremely Fast Collet Changes
Changing collets on a Royal Quick-Grip™ CNC Collet Chuck takes just a few seconds. A unique hook and groove design for securing collets is used instead of traditional threads.
Dead-Length Operation
Royal Quick-Grip™ Accu-Length™ CNC Collet Chucks incorporate dead length operation to eliminate part pullback. With this design, the collet is held stationary in the chuck body and a tapered sleeve pushes forward to compress it, resulting in precise z-axis workpiece positioning.
Wide Gripping Range
Royal Quick-Grip™ Collets have a 0.062" gripping range (±0.031"), enabling them to accommodate undersized and oversized bar stock. This range is even larger for the QG-100 – 0.080".
High Accuracy
Royal Quick-Grip™ CNC Collet Chucks are very accurate – runout on the closing angle is guaranteed to be within 0.0002" TIR.
Low-Profile
Royal Quick-Grip™ CNC Collet Chucks have smaller nose diameters than other quick-change collet chucks for superior tool clearance.
Collet Compatibility
Royal Quick-Grip™ Collet Chucks can sometimes utilize other brands of quick-change collets. Call Royal to verify.
Heavy-Duty Construction
All chuck components, except for the drawtube connector, are hardened to Rc 61-63 for high rigidity and durability.
Easy Installation
Royal Quick-Grip™ Collet Chucks include all mounting hardware, mounting wrenches, and a custom-machined drawtube connector to ensure hassle-free installation.
Specials
If you have a special application that goes beyond the scope of our standard line, we will be happy to design and build a custom system to meet your needs. Please contact us to discuss your requirements.
ROYAL QUICK-GRIP™ ACCU-LENGTH™ CNC COLLET CHUCKS
- 10-second collet changes.
- Widest collet gripping range – 0.062″ (0.080″ for QG-100).
- Extremely accurate – 0.0002″ TIR.
- Parallel workpiece gripping.
- Compact and ultra-compact models to suit all machines and applications.
- In-stock for same-day shipping.
SPINDLE TYPE | COLLET TYPE | MAX CAPACITY BAR | MAX CAPACITY SLUG3 | CHUCK STYLE | A OVERALL LENGTH | B NOSE DIAMETER | C NOSE LENGTH | D BODY DIAMETER | E FLANGE DIAMETER | CHUCK WEIGHT (lbs.) | MAX DRAWBAR FORCE (lbs.) | MAX CLAMPING FORCE (lbs.) | MAX RPM | PART NUMBER | PRICE1 |  |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A2-4 | QG-32 | 1.28 | 1.80 | UC | 4.40 | 3.56 | 0.75 | 5.63 | 6.35 | 18 | 5260 | 15740 | 7,000 | $4,530.00 | ||
A2-6 | QG-32 | 1.28 | 1.80 | UC | 4.53 | 3.56 | 0.75 | 5.63 | 6.35 | 17 | 5260 | 15740 | 7,000 | $4,530.00 | ||
A2-5 | QG-32 | 1.28 | 1.80 | UC | 4.53 | 3.56 | 0.75 | 5.63 | 7.25 | 20 | 5260 | 15740 | 7,000 | $4,530.00 | ||
110mm | QG-32 | 1.28 | 1.80 | UC | 4.18 | 3.56 | 0.75 | 5.63 | 5.63 | 16 | 5260 | 15740 | 7,000 | $4,530.00 | ||
140mm | QG-32 | 1.28 | 1.80 | UC | 4.18 | 3.56 | 0.75 | 5.63 | 6.35 | 16 | 5260 | 15740 | 7,000 | $4,530.00 | ||
A2-5 | QG-42 | 1.66 | 2.62 | C | 4.60 | 4.00 | 0.75 | 5.70 | 6.45 | 19 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
A2-5 | QG-42 | 1.66 | 2.62 | UC | 4.00 | 4.00 | 0.75 | 5.70 | 6.45 | 15 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
A2-6 | QG-42 | 1.66 | 2.62 | UC | 4.45 | 4.00 | 0.75 | 6.20 | 7.25 | 21 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
110mm | QG-42 | 1.66 | 2.62 | UC | 3.95 | 4.07 | 0.75 | 5.70 | 5.70 | 15 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
140mm | QG-42 | 1.66 | 2.62 | UC | 3.95 | 4.00 | 0.75 | 5.70 | 5.70 | 15 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
A2-5 | QG-52 | 2.03 | 2.57 | C | 4.80 | 4.36 | 0.75 | 6.10 | 6.85 | 24 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
A2-5 | QG-52 | 2.03 | 2.57 | UC | 4.20 | 4.36 | 0.75 | 6.10 | 6.10 | 18 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
A2-6 | QG-52 | 2.03 | 2.57 | UC | 4.60 | 4.36 | 0.75 | 6.20 | 7.25 | 23 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
110mm | QG-52 | 2.03 | 2.57 | UC | 4.20 | 4.36 | 0.75 | 6.10 | 6.10 | 17 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
140mm | QG-52 | 2.03 | 2.57 | UC | 4.20 | 4.36 | 0.75 | 6.10 | 6.10 | 19 | 7,865 | 17,980 | 6,000 | $4,530.00 | ||
A2-5 | QG-65 | 2.66 | 3.40 | C | 4.80 | 4.91 | 0.87 | 6.55 | 7.25 | 27 | 10,115 | 23,600 | 6,000 | $5,120.00 | ||
A2-5 | QG-65 | 2.66 | 3.40 | UC | 4.50 | 4.91 | 0.87 | 6.55 | 6.55 | 24 | 10,115 | 23,600 | 6,000 | $5,120.00 | ||
A2-6 | QG-65 | 2.66 | 3.40 | C | 5.33 | 4.91 | 0.87 | 6.55 | 7.25 | 31 | 10,115 | 23,600 | 6,000 | $5,120.00 | ||
A2-6 | QG-65 | 2.66 | 3.40 | UC | 4.65 | 4.91 | 0.87 | 6.55 | 7.25 | 24 | 10,115 | 23,600 | 6,000 | $5,120.00 | ||
A2-6 | QG-65 | 2.66 | 3.40 | EL2 | 7.00 | 4.91 | 0.87 | 6.55 | 7.25 | 45 | 10,115 | 23,600 | 6,000 | $5,120.00 | ||
A2-8 | QG-65 | 2.66 | 3.40 | C | 5.50 | 4.91 | 0.87 | 8.00 | 9.45 | 45 | 10,115 | 23,600 | 6,000 | $5,760.00 | ||
110mm | QG-65 | 2.66 | 3.40 | UC | 4.45 | 4.91 | 0.87 | 6.55 | 6.55 | 25 | 10,115 | 23,600 | 6,000 | $5,590.00 | ||
140mm | QG-65 | 2.66 | 3.40 | UC | 4.80 | 4.91 | 0.87 | 6.55 | 7.45 | 29 | 10,115 | 23,600 | 6,000 | $5,590.00 | ||
A2-5 | QG-80 | 3.28 | 4.00 | C | 4.95 | 5.63 | 0.87 | 7.45 | 7.45 | 33 | 11,240 | 25,850 | 5,000 | $5,950.00 | ||
A2-6 | QG-80 | 3.28 | 4.00 | C | 4.95 | 5.63 | 0.87 | 7.45 | 7.45 | 35 | 11,240 | 25,850 | 5,000 | $5,950.00 | ||
A2-6 | QG-80 | 3.28 | 4.00 | EL2 | 7.00 | 5.63 | 0.87 | 7.45 | 7.45 | 58 | 11,240 | 25,850 | 5,000 | $5,950.00 | ||
A2-8 | QG-80 | 3.28 | 4.00 | C | 5.20 | 5.63 | 0.87 | 8.00 | 9.45 | 43 | 11,240 | 25,850 | 5,000 | $5,950.00 | ||
140mm | QG-80 | 3.28 | 4.00 | C | 4.75 | 5.63 | 0.87 | 7.45 | 7.45 | 34 | 11,240 | 25,850 | 5,000 | $5,950.00 | ||
A2-6 | QG-100 | 4.03 | 5.15 | C | 6.18 | 7.00 | 0.87 | 9.40 | 9.40 | 76 | 14,610 | 33,720 | 5,000 | $8,610.00 | ||
A2-8 | QG-100 | 4.03 | 5.15 | C | 6.43 | 7.00 | 0.87 | 9.40 | 10.75 | 89 | 14,610 | 33,720 | 5,000 | $8,720.00 | ||
A2-11 | QG-100 | 4.03 | 5.15 | C | 6.68 | 7.00 | 0.87 | 9.40 | 12.50 | 93 | 14,610 | 33,720 | 5,000 | $10,190.00 |
¹ Includes drawtube connector. Collets and installation tool sold separately.
² Extended-length – for use on machines where z-axis turret travel is limited.
³ Slug capacity requires counterboring of collets.
ROYAL ULTRA-PRECISION QUICK-GRIP™ COLLETS
Collets
QG-32
1.28" Capacity
Collets
QG-42
1.66" Capacity
Collets
QG-52
2.03" Capacity
Collets
QG-65
2.66" Capacity
Collets
QG-80
3.28" Capacity
Collets
QG-100
4.03" Capacity
Collets
Emergency
Collets
S-Type
Accessories
Quick-Grip Accessories
These Extremely Advanced Collets Will Revolutionize Your Workholding
- Industry-leading 0.062" Gripping Range (0.080" for QG-100) – greater than other quick-change collets on the market and more than 12X that of traditional spring collets.
- Royal Quick-Grip Collets are precision-ground to nominal size, with a gripping range of ±0.031" (0.040” for QG-100) to handle undersized/oversized stock.
- Example – a ½" collet is ground to 0.500" dia., and can hold any part ranging in size from 0.469" – 0.531" dia.
- Ultra-Precision Accuracy – 0.0002" TIR or better guaranteed on round-bores. Total system accuracy (chuck + collet) guaranteed to 0.0004" or better.
- All Royal Quick-Grip™ Collets are designed for minimal projection beyond the chuck face (≤ 0.020") for optimum rigidity and machine work-zone utilization.
- All models have a smooth gripping surface, but round-bores are also available from stock in a double-serrated version for very aggressive first-op machining.
- Vulcanized rubber between the hardened steel collet segments provides outstanding protection against coolant and chip penetration, and Royal’s advanced vulcanization process carries a lifetime guarantee against failure.
- Collets can be counter-bored for increased capacity.
- S-type master collets available for QG-65 and QG-80 chuck models.
- Royal Quick-Grip™ Collets are compatible with some other brands of quick-change chucks, but note that the QG-80 and QG-100 models have a six-slot design (for increased gripping torque) that requires the use of a Royal installation tool. Call us to verify compatibility.
- Custom sizes and shapes available as quick-ship specials. Collet segments can also be carbide-coated for extremely harsh applications. Contact one of our applications engineers at 1-800-645-4174 to discuss your requirements.
Why Do Top Manufacturers Insist on Royal Quick-Grip™ Collets?
Industry-Leading 0.062" (0.080” for QG-100) Gripping Range Covers More Diameters with Fewer Collets
Ultra-Precision Accuracy – 0.0002" TIR or Better
Vulcanization Guaranteed for Life
Parallel-Grip Maintains Full-Length Part Engagement
Exceptional Grip-Force Enables Very Aggressive Cutting
Exclusive Royal Risk-Free Performance Guarantee
Fast Delivery on Custom Shapes and Sizes
Special Slot Relief Grinding Eliminates "Collet Popping" and Minimizes Chuck Wear
Order Today – Have it Tomorrow
Round – Smooth
Round – Serrated
Hex
Square