Royal Quick-Grip™ Accessories

Royal Quick-Grip™ Collet Installation Tools

  • Easy to use tools enable collets to be changed in seconds.
  • Simply insert the steel pins into the collet face holes and squeeze the trigger to collapse the collet.
  • Available in both manual and pneumatic versions.
    Note – pneumatic changing tools require an air supply line.

Royal Quick-Grip™ Collet Installation Tools

Filters Sort results
Reset Apply
FITS CHUCK MODEL
TYPE
NUMBER OF SEGMENTS
PART NUMBER
PRICE
QG-42
Manual
3
44097
550
QG-42
Pneumatic
3
44371
1,187
QG-52
Manual
3
44095
550
QG-52
Pneumatic
3
44359
1,187
QG-65
Manual
3
44098
550
QG-65
Pneumatic
3
44372
1,187
QG-80
Manual
6
44099
550
QG-80
Manual
S-Type
4
*
* Please note that the QG-80 S-Type installation tool is not the same as the one offered for our regular QG-80 collets because our hardened and ground QG-80 collets have six segments while the QG-80 master collet has four segments.
44199
589
QG-80
Pneumatic
6
44373
2,035
QG-100
Pneumatic
6
44374
2,035
* Please note that the QG-80 S-Type installation tool is not the same as the one offered for our regular QG-80 collets because our hardened and ground QG-80 collets have six segments while the QG-80 master collet has four segments.

Royal Quick-Grip™ Standard and Extra-Depth Stops

Royal Quick-Grip™ Standard Stop
  • A stop is used for accurate z-axis positioning of short workpieces within a collet.
  • Rod length is easily adjusted according to workpiece parameters.
  • Royal’s easy-to-install stop assemblies locate against a shoulder within the chuck body and are held rigidly in-place with radially-located screws.

Royal Quick-Grip™ Standard Stops

Filters Sort results
Reset Apply
FITS CHUCK MODEL
MAX THROAT DEPTH*
ACCU-LENGTH™
CHUCK MODELS
MAX THROAT DEPTH*
PULL-TO-A-STOP
CHUCK MODELS
PART NUMBER
PRICE
QG-42
2.03
2.89
44080
190
QG-52
2.17
3.04
44818
190
QG-65
2.47
3.33
44081
215
QG-80
2.46
3.33
44084
245
QG-100
2.71
3.65
44816
278
* Measured from collet face.
Royal Quick-Grip™ Extra-Depth Stop
  • Royal Quick-Grip™ Extra-Depth Stops have a greater throat depth than the standard stops, enabling longer parts to be swallowed while minimizing protrusion beyond the collet face.
  • For use with Royal Accu-Length™ and Pull-to-a-Stop Quick-Grip™ Collet Chuck Models.

Royal Quick-Grip™ Extra-Depth Stops

Filters Sort results
Reset Apply
FITS CHUCK MODEL
MAX THROAT DEPTH*
ACCU-LENGTH™
CHUCK MODELS
MAX THROAT DEPTH*
PULL-TO-A-STOP
CHUCK MODELS
MAX
PART
DIAMETER
MIN
DRAW TUBE
I.D.
PART NUMBER
PRICE
QG-42
5.00
5.86
1.25
1.66
44802
335
QG-52
5.00
5.87
1.38
1.78
44803
335
QG-65
6.00
6.86
1.25
1.66
44804
379
QG-65
6.00
6.86
2.25
2.73
44806
379
QG-80
5.95
6.82
2.00
2.48
44808
457
QG-80
5.95
6.82
2.75
3.23
44810
457
QG-100
6.00
6.94
2.75
3.23
44812
553
QG-100
6.00
6.94
3.50
3.91
44814
553
* Measured from collet face.

Royal Quick-Grip™ Ejectors

Royal Quick-Grip™ Ejector
  • Ejectors are used in sub-spindle applications with Accu-Length™ Chucks to push finished workpieces into the part catcher upon completion.
  • A hardened plunger rod and a bronze bushing work together to provide smooth, consistent operation.
  • Design enables tip to be changed without removing ejector assembly from the chuck.
  • Available in standard and compact models:
    • Standard Model  – for parts ranging in size from 0.81″ to 4.00″ dia.
    • Compact Model – for parts ranging in size from 0.18″ to 1.50″ dia.
  • Easily customizable as workpiece configurations require.
  • Pneumatic versions also available upon request.

For an alternative solution to an ejector, check out the Royal Grippex Coolant-Actuated Bar Puller. The Grippex, when fitted with special jaws, can be used to pull finished parts from a sub-spindle, eliminating the need for an ejector and freeing up the spindle bore to swallow longer parts.

Royal Quick-Grip™ Ejectors

Filters Sort results
Reset Apply
FITS ACCU-LENGTH™
CHUCK MODEL
EJECTOR
STYLE
PART DIAMETER
RANGE
PART NUMBER
PRICE
QG-42
Compact
0.18″–1.25″
44043
746
QG-42
Standard
0.81″–1.63″
44040
861
QG-52
Compact
0.18″–1.25″
44037
746
QG-52
Standard
0.81″–1.63″
44035
861
QG-65
Compact
0.18″–1.25″
44044
758
QG-65
Standard
0.81″–2.63″
44041
875
QG-80
Compact
0.18″–1.25″
44045
772
QG-80
Standard
0.81″–3.25″
44042
887
QG-100
Compact
0.50″–1.50″
44047
787
QG-100
Standard
1.50″–4.00″
44046
903

Royal Hardened and Ground Adapter Plates

Royal Hardened and Ground Adapter Plates
  • Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles:
    • Mount a larger chuck on a smaller spindle for increased capacity.
    • Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds.
  • All Royal adapter plates are hardened to RC 61-63.
  • High accuracy – 0.0002″ TIR guaranteed.
  • Metric screws included for mounting plate to spindle.
  • Drive button included on all plates.
Filters Sort results
Reset Apply
SPINDLE
MOUNT
CHUCK
MOUNT
PLATE
DIAMETER
PLATE
THICKNESS
THRU-HOLE
DIA.
SPINDLE
MOUNTING
BOLTS
CHUCK
MOUNT
THREADS
PART NUMBER
PRICE
A2-5
A2-6
6.68
1.00
2.63
M-10
M-12
44000
1,315
A2-6
A2-6
6.68
1.25
3.56
M-12
M-12
44009
1,170
A2-6
A2-8
8.68
1.00
3.75
M-12
M-16
44004
1,520
A2-8
A2-6
8.25
1.75
3.44
M-16
M-12
44010
1,520
A2-8
A2-8
8.69
2.00
4.76
M-16
M-16
44011
1,600
A2-11
A2-8
11.00
2.00
4.76
M-20
M-16
44014
1,925
110MM
A2-5
5.31
0.75
2.00
M-10
M-10
44006
1,140
140MM
A2-6
6.68
1.00
3.00
M-10
M-12
44008
1,350
Other configurations available. Contact us with your requirements.