Royal Quick-Grip™ Accessories
Royal Quick-Grip™ Collet Installation Tools
- Easy to use tools enable collets to be changed in seconds.
- Simply insert the steel pins into the collet face holes and squeeze the trigger to collapse the collet.
- Available in both manual and pneumatic versions.
Note – pneumatic changing tools require an air supply line.
Royal Quick-Grip™ Collet Installation Tools
Filters Sort results
Reset Apply
FITS CHUCK MODEL | TYPE | NUMBER OF SEGMENTS | PART NUMBER | PRICE | |
|---|---|---|---|---|---|
QG-32 | Manual | 3 | $653.00 | ||
QG-42 | Manual | 3 | $653.00 | ||
QG-42 | Pneumatic | 3 | $1,650.00 | ||
QG-52 | Manual | 3 | $653.00 | ||
QG-52 | Pneumatic | 3 | $1,495.00 | ||
QG-65 | Manual | 3 | $653.00 | ||
QG-65 | Pneumatic | 3 | $1,650.00 | ||
QG-80 | Manual | 6 | $678.00 | ||
QG-80 | Manual ⋅ S-Type | * 4 * Please note that the QG-80 S-Type installation tool is not the same as the one offered for our regular QG-80 collets because our hardened and ground QG-80 collets have six segments while the QG-80 master collet has four segments. | $838.00 | ||
QG-80 | Pneumatic | 6 | $2,815.00 | ||
QG-100 | Pneumatic | 6 | $2,815.00 |
* Please note that the QG-80 S-Type installation tool is not the same as the one offered for our regular QG-80 collets because our hardened and ground QG-80 collets have six segments while the QG-80 master collet has four segments.
Royal Quick-Grip™ Standard and Extra-Depth Stops
- A stop is used for accurate z-axis positioning of short workpieces within a collet.
- Rod length is easily adjusted according to workpiece parameters.
- Royal’s easy-to-install stop assemblies locate against a shoulder within the chuck body and are held rigidly in-place with radially-located screws.
* Measured from collet face.
- Royal Quick-Grip™ Extra-Depth Stops have a greater throat depth than the standard stops, enabling longer parts to be swallowed while minimizing protrusion beyond the collet face.
- For use with Royal Accu-Length™ and Pull-to-a-Stop Quick-Grip™ Collet Chuck Models.
Filters Sort results
Reset Apply
FITS CHUCK MODEL | MAX THROAT DEPTH* ACCU-LENGTH™ CHUCK MODELS | MAX THROAT DEPTH* PULL-TO-A-STOP CHUCK MODELS | MAX PART DIAMETER | MIN DRAW TUBE I.D. | PART NUMBER | PRICE | |
|---|---|---|---|---|---|---|---|
QG-32 | 5.00 | N/A | 0.88 | 1.29 | $400.00 | ||
QG-42 | 5.00 | 5.86 | 1.25 | 1.66 | $400.00 | ||
QG-52 | 5.00 | 5.87 | 1.38 | 1.78 | $400.00 | ||
QG-65 | 6.00 | 6.86 | 1.25 | 1.66 | $452.00 | ||
QG-65 | 6.00 | 6.86 | 2.25 | 2.73 | $452.00 | ||
QG-80 | 5.95 | 6.82 | 2.00 | 2.48 | $545.00 | ||
QG-80 | 5.95 | 6.82 | 2.75 | 3.23 | $545.00 | ||
QG-100 | 6.00 | 6.94 | 2.75 | 3.23 | $659.00 | ||
QG-100 | 6.00 | 6.94 | 3.50 | 3.91 | $659.00 |
* Measured from collet face.
Royal Quick-Grip™ Ejectors
- Ejectors are used in sub-spindle applications with Accu-Length™ Chucks to push finished workpieces into the part catcher upon completion.
- A hardened plunger rod and a bronze bushing work together to provide smooth, consistent operation.
- Design enables tip to be changed without removing ejector assembly from the chuck.
- Available in standard and compact models:
- Standard Model – for parts ranging in size from 0.81″ to 4.00″ dia.
- Compact Model – for parts ranging in size from 0.18″ to 1.50″ dia.
- Easily customizable as workpiece configurations require.
- Pneumatic versions also available upon request.
For an alternative solution to an ejector, check out the Royal Grippex Coolant-Actuated Bar Puller. The Grippex, when fitted with special jaws, can be used to pull finished parts from a sub-spindle, eliminating the need for an ejector and freeing up the spindle bore to swallow longer parts.
Filters Sort results
Reset Apply
FITS ACCU-LENGTH™ CHUCK MODEL | EJECTOR STYLE | PART DIAMETER RANGE | PART NUMBER | PRICE | |
|---|---|---|---|---|---|
QG-32 | Compact | 0.18″–1.25″ | $944.00 | ||
QG-42 | Compact | 0.18″–1.25″ | $1,035.00 | ||
QG-42 | Standard | 0.81″–1.63″ | $1,195.00 | ||
QG-52 | Compact | 0.18″–1.25″ | $1,035.00 | ||
QG-52 | Standard | 0.81″–1.63″ | $1,195.00 | ||
QG-65 | Compact | 0.18″–1.25″ | $1,050.00 | ||
QG-65 | Standard | 0.81″–2.63″ | $1,215.00 | ||
QG-80 | Compact | 0.18″–1.25″ | $1,075.00 | ||
QG-80 | Standard | 0.81″–3.25″ | $1,230.00 | ||
QG-100 | Compact | 0.50″–1.50″ | $1,095.00 | ||
QG-100 | Standard | 1.50″–4.00″ | $1,255.00 |
Royal Hardened and Ground Adapter Plates
- Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles:
- Mount a larger chuck on a smaller spindle for increased capacity.
- Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds.
- All Royal adapter plates are hardened to RC 61-63.
- High accuracy – 0.0002″ TIR guaranteed.
- Metric screws included for mounting plate to spindle.
- Drive button included on all plates.
Filters Sort results
Reset Apply
SPINDLE MOUNT | CHUCK MOUNT | PLATE DIAMETER | PLATE THICKNESS | THRU-HOLE DIA. | SPINDLE MOUNTING BOLTS | CHUCK MOUNT THREADS | PART NUMBER | PRICE | |
|---|---|---|---|---|---|---|---|---|---|
A2-5 | A2-6 | 6.68 | 1.00 | 2.63 | M-10 | M-12 | $1,855.00 | ||
A2-6 | A2-6 | 6.68 | 1.25 | 3.56 | M-12 | M-12 | $1,655.00 | ||
A2-6 | A2-8 | 8.68 | 1.00 | 3.75 | M-12 | M-16 | $2,150.00 | ||
A2-8 | A2-6 | 8.25 | 1.75 | 3.44 | M-16 | M-12 | $2,150.00 | ||
A2-8 | A2-8 | 8.69 | 2.00 | 4.76 | M-16 | M-16 | $2,260.00 | ||
A2-11 | A2-8 | 11.00 | 2.00 | 4.76 | M-20 | M-16 | $2,725.00 | ||
110MM | A2-5 | 5.31 | 0.75 | 2.00 | M-10 | M-10 | $1,615.00 | ||
140MM | A2-6 | 6.68 | 1.00 | 3.00 | M-10 | M-12 | $1,920.00 |
Other configurations available. Contact us with your requirements.